Tuesday, November 29, 2011

Wipers starts working when High beam lights are turned ON?

This problem is faced by many others too.
When the high beam headlight is power ON,the windshield wipers starts working/operating.
This is due to the wire short.
This problem is caused by a defective multifunction switch on the steering column, the contacts inside the switch are damaged and touching, this is the cause of the wipers coming on when you just turn on the high beams. To replace the switch you must remove the trim covers from the steering wheel. The switch is about $100.00 on line.You can buy the switch at your regular auto part store.Always buy branded parts of good quality,instead on cheaper/third grade non branded auto parts.
This will help.
Thanks.-----------------

For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------

The car will not start?

-----------------

Car will not crank?


-----------

Car has no spark?


-------------

How to troubleshoot car battery?

-----------------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

How to replace starter in car?



-----------

car will turn over but will not start?



-----------------

Car wont start?


----------

No comments:

Post a Comment