Tuesday, December 6, 2011

Location of Head Gasket on 1994 Grand Marquis?

The head gasket is always the gasket between the head (cylinder) and the main block of the motor.
The head gasket (in your case gaskets) is located on the top of the engine block under the engine cylinder head which is under the Camshaft cover which is the very top of the engine. This car is a V8 engine so it has 2 heads and 2 head gaskets, one on each side of the engine. It is a very expensive job to replace head gaskets.
This requires a lot of labor to replace. The intake must be removed, then the cylinder head itself. This is a major repair if the head gasket needs to be replaced.
This details will help.Thanks.
If you need dis-assembly or replacement instructions for any other auto/car part, or you want to ask question related to your car/truck jeep problem then please leave the comment with your details, so I can provide you the required instructions and solutions.
For more car help solutions,check the list mentioned below:-----

Water pump replacing procedure for all vehicles?

All types of car overheating problems and troubleshooting?

Engine Overheats and heater blowing cold?

Car overheats and Air blows hot at idle?

Car runs hot in Traffic?

Car engine Overheats and transmission starts slipping?

How to replace heater core for All car models?

Click the link below:---

How to Flush Heater Core?


All types of Car heater Problem troubleshooting?

Blower only blows warm air ?


AC cool air enters only the passenger compartment even with the heat control turn all the way?


Saturn Car Blower motor Only works on High?


No hot air from defrost vents?


Radiator replaced but still Car is over heating?


Ford ranger heater blows cold air?


No comments:

Post a Comment