Thursday, December 29, 2011

Oil light blinks on dashboard?

This problem is noticed on 200 VW Beetle.Its 2.0 non turbo engine.Its Gas engine.

The 2.0 is typically an indestructible engine.

It's either an electrical issue, meaning a sending unit, or a mechanical issue, meaning either pump or other reason for low oil pressure.
I will suggest get the oil pressure test done.The oil pressure at 2k rpm should be between 3.0 and 4.5 bar.
And at idle, it should be 2.0 bar.
However, a new oil pressure sending unit is also very inexpensive ($24) and easily replaced. It lives at the top of the filter housing, here:See the image below :----

If the oil pump checks out faulty then Pump cost is $201 retail, and replacement time for oil pump is between 4.5 and 5.0 hours shop time for labor.
If you are not familiar with doing this repairs and replacement then,
A good independent Euro shop mechanic can do this job,but there is no such Auto repair shop near to your place,then your car dealer is the best option.

-----------
For your help, there are few Car Engine oil related solved problem listed below. You can go through it.

Common Causes of Car Oil Leaks?

http://schematicsdiagram.blogspot.com/2011/12/common-causes-of-car-oil-leaks.html

Troubleshoot Car Oil leak?

http://schematicsdiagram.blogspot.com/2011/12/troubleshoot-car-oil-leak.html

Low oil pressure light on Dodge Magnum? 
http://howtobyme.blogspot.com/2011/11/low-oil-pressure-light-on-dodge-magnum.html 

Kia Sportage leaking oil from oil pan? 
http://howtobyme.blogspot.com/2011/11/kia-sportage-leaking-oil-from-oil-pan.html 
Car Turns OFF due to low oil pressure warning light?


For more oil and oil pump details check out the direct links below: --- 
Oil pressure for 2001 gmc jimmy V6? 

How to replace Oil Pan on 2008 Honda Odyssey?

How to replace Oil Pressure Sensor on 2008 Honda Odyssey?

How to replace Oil Pump on 2008 Honda Odyssey?

Car oil leak?

Car oil leaks from valve cover gasket?

http://schematicsdiagram.blogspot.com/2011/12/car-oil-leaks-from-valve-cover-gasket.html

No comments:

Post a Comment