Wednesday, February 29, 2012

Where is thermostat located on 2005 Dodge neon?


It is under the housing that the upper radiator hose hooks to on the engine .

To replace thermostat follow this procedure :---
Removal & Installation


  1. Drain cooling system to the thermostat level or below.
  2. Remove coolant recovery/reserve system hose and radiator upper hose.
  3. Remove thermostat/engine outlet connector bolts.
  4. Remove thermostat and O-ring assembly. 

    image
    Fig. Pressure cap (1), thermostat housing/engine outlet connector (2), thermostat (3), O-ring (4) and vent facing up (5)
    Pressure cap (1), thermostat housing/engine outlet connector (2), thermostat (3), O-ring (4) and vent facing up (5)
To install:
  1. Clean all sealing surfaces.
  2. Place the new thermostat assembly into the thermostat housing/outlet connector. Align vent with notch in cylinder head.
  3. Install thermostat housing/outlet connector onto cylinder head and tighten bolts to 110 inch lbs. (12.5 Nm)
  4. Install the radiator upper hose.
  5. Connect the coolant recovery/reserve system hose.
  6. Fill the cooling system

This details will help.
Thanks.

See below latest solved car problems :----

How to replace Thermostat on Acura Car models?


Where is thermostat located on 2006 dodge magnum 3.5L?//



Thermostat on AUDI 1.9 TDI?



How to replace Radiator on Audi and VW car models?


How to Replace a Thermostat.

How to locate Thermostat on Any car model?

Where is thermostat on Audi A6?

How to replace thermostat on 1992 Buick century?

Replacing thermostat on 1999 Mercury Cougar?

Thermostat Replacement on Toyota Corolla?

http://technoanswers.blogspot.com/2011/12/thermostat-replacement-on-toyota.html



No comments:

Post a Comment