Thursday, March 29, 2012

Adjustment For AIR MIX CABLE & WATER CONTROL VALVE on Toyota?

The Procedure and details mentioned are similar for Toyota Celica, Corolla, ECHO & MR2 car models.


Adjustment Details For
AIR MIX CABLE
WATER CONTROL VALVE


Air Mix Cable



  1. Disengage the control cable from the lever at the heater/cooling unit end of the cable.


image
Fig. Adjusting the air mix damper control cable
  1. Set both the air mix door and the control panel to the COOL position. Then, slide the control cable through the adjusting clip until the eyelet on the cable end can be engaged to the lever. Make sure the cable is secured in the clamps.
  2. Move the control levers left and right and check for stiffness or binding through the full range of the levers.
  3. Test the control cable operation.

Water Control Valve



  1. Disengage the adjusting clip.


image
Fig. Adjusting the water control valve cable
  1. Place the water valve lever on the COOL position while pushing the outer cable in the COOL direction. Clamp the outer cable to the water valve bracket with the adjusting clip.
  2. Move the control levers left and right and check for stiffness or binding through the full range of the levers.
  3. Test the control cable operation.


These details will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html



No comments:

Post a Comment