Friday, March 16, 2012

How To Replace Accessory Drive Belts On Ford Ranger?

The Details to replace Accessory Drive Belts is as follows:---



Accessory Drive Belts
ADJUSTMENT
BELT ROUTINGS
INSPECTION
REMOVAL & INSTALLATION

Procedures are mentioned below for your help:----


Adjustment



Specific to:
Ford Ranger 2008-2009
The engines are equipped with an automatic belt tensioner. No adjustment is possible or necessary.

Belt Routings



2.3L Engine
Specific to:
Ford Ranger 2008-2009


image 
Fig. Accessory drive belt routing-2.3L engine with A/C


Click image to see an enlarged view
Fig. Accessory drive belt routing-2.3L engine without A/C
3.0L Engine
Specific to:
Ford Ranger 2008


Click image to see an enlarged view
Fig. Accessory drive belt routing-3.0L with A/C


Click image to see an enlarged view
Fig. Accessory drive belt routing-3.0L without A/C
4.0L Engine
Specific to:
Ford Ranger 2008-2009


Click image to see an enlarged view
Fig. Accessory drive belt routing-4.0L with A/C


Click image to see an enlarged view
Fig. Accessory drive belt routing-4.0L without A/C

Inspection



Specific to:
Ford Ranger 2008-2009
Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.

Removal & Installation



2.3L & 4.0L Engines
Specific to:
Ford Ranger 2008-2009
On 2.3L and 4.0L engines, rotate the tensioner bolt counterclockwise and remove the belt.
Click image to see an enlarged view
Fig. Accessory drive belt routing-2.3L engine with A/C


Click image to see an enlarged view
Fig. Accessory drive belt routing-2.3L engine without A/C


Click image to see an enlarged view
Fig. Accessory drive belt routing-4.0L with A/C


Click image to see an enlarged view
Fig. Accessory drive belt routing-4.0L without A/C
3.0L Engine
Specific to:
Ford Ranger 2008
On 3.0L engines, rotate the tensioner bolt clockwise and remove the belt.
Click image to see an enlarged view
Fig. Accessory drive belt routing-3.0L with A/C


Click image to see an enlarged view
Fig. Accessory drive belt routing-3.0L without A/C





These details will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html



No comments:

Post a Comment