Friday, March 16, 2012

How to Replace Blend Door Actuator On Ford F Series And Lincoln Mark?


The procedure is similar for both ford and Lincoln car models:-----

The Details To replace Blend Door Actuator is as follows:---

Removal & Installation Procedure is as follows:---

  1. Release the stops and lower the glove compartment door.
  2. Disconnect the connector. 

    image
    Fig. Blend door actuator-F-250 and F-350
  3. Remove the two screws. Rotate the blend door actuator and bracket assembly. Remove the electronic blend door actuator and bracket assembly.
  4. To install, reverse the removal procedure.




These details will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html



No comments:

Post a Comment