Thursday, March 15, 2012

How to replace Heater Core On Ford Mustang?

Heater Core Replacing for 2010 Ford Mustang and other mustang car years are as follows:---

Removal & Installation:---


NOTE
The heater core and evaporator core are not individually serviced. They are serviced only with the heater core and evaporator core housing.


NOTE
If a heater core leak is suspected, the heater core must be leak tested before it is removed from the vehicle.

5.4L vehicles
  1. Release the fuel system pressure.
  2. Recover the refrigerant.
  3. Drain the engine coolant.
  4. Remove the instrument panel.
5.4L vehicles
  1. Remove the supercharger.
  2. Disconnect the heater hose fittings at the rear of the RH cylinder head and position the heater hoses aside.
All vehicles
  1. Disconnect the heater core inlet and outlet hoses at the heater core.
  2. Remove the Thermostatic Expansion Valve (TXV) fitting nut and disconnect the fitting. Discard the gasket seals. To install, tighten to 133 inch lbs. (15 Nm).
  3. Remove the 2 exterior heater core and evaporator core housing nuts at the dash panel. To install, tighten to 62 inch lbs. (7 Nm).
  4. Detach the antenna cable retainers from the heater core and evaporator core housing.
  5. Remove the interior heater core and evaporator core housing nut. To install, tighten to 44 inch lbs. (5 Nm).
  6. Remove the heater core and evaporator core housing.

    Click image to see an enlarged view
    Fig. Removing the heater core and evaporator core housing (1 of 2)


    Click image to see an enlarged view
    Fig. Removing the heater core and evaporator core housing (2 of 2)
To install:
  1. To install, reverse the removal procedure. Install new gasket seals. Add the correct amount of clean PAG oil to the refrigerant system.
  2. Fill the engine cooling system.
  3. Evacuate, leak test and charge the refrigerant system.

These details will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


1 comment:


  1. Raj’s Safe Driving School in Melbourne is a great place to learn to drive with experienced instructors to teach driving lesson in a Professional way to your specific requirements, needs, skills and confidence in your timeframe.

    Driving school | Driving Instructor Melbourne

    ReplyDelete