Friday, March 16, 2012

How to replace Radiator On Ford Mustang?

The radiator replacing details are as follows:----

Removal & Installation:---


  1. Drain the cooling system.
  2. Remove the 7 bolts and the lower splash shield. To install, tighten to 44 inch lbs. (5 Nm).
  3. Remove the 6 pushpin retainers and the air deflector.
  4. Remove the cooling fan motor and shroud.
  5. Disconnect the degas bottle-to-radiator hose and position aside.
  6. Disconnect the upper radiator hose from the radiator and position aside.
  7. Disconnect the lower radiator hose from the radiator and position aside.
  8. Remove the 4 bolts and the radiator support brackets. To install, tighten to 89 inch lbs. (10 Nm).
  9. Remove the 2 power steering tubes and A/C condenser retaining nuts and position aside the power steering tubes. To install, tighten to 71 inch lbs. (8 Nm).
  10. Remove the 2 A/C condenser bolts. To install, tighten to 89 inch lbs. (10 Nm).
  11. If equipped, remove the 2 bolts and the transmission cooler and position aside. To install, tighten to 89 inch lbs. (10 Nm).
  12. Remove the radiator. 

    image
    Fig. Removing and installing the radiator (1 of 2)


    image
    Fig. Removing and installing the radiator (2 of 2)
To install:
  1. To install, reverse the removal procedure.
  2. Fill and bleed the cooling system.

These details will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html



No comments:

Post a Comment